Description
The
Shure MX412/C Cardioid Microflex Gooseneck Microphone is fully adjustable
and features an interchangeable condenser microphone cartridge. Designed for
easy replacement, the interchangeable cartridges offer wide frequency response
and accurate sound reproduction for a broad variety of applications, such as
houses of worship, courtrooms, and conference centers. Plus, the condenser
cartridges fit every Microflex model for enhanced convenience and consistent
sound. Every Microflex Gooseneck features high sensitivity and a balanced,
transformerless output for maximum immunity to electromagnetic hum and RF
interference, even over long cable runs.
Includes:
- MX412/C
Cardioid Microflex Gooseneck Microphone
- Flange mount
- Retainer
- Isolation
Ring
- Snap-fit
foam windscreen
- Shock Mount
- Hex Wrench
#4
Shure
MX412/C Cardioid Microflex Gooseneck Microphone Features:
- Attached XLR
preamp
- Wide dynamic
range and frequency response for accurate sound reproduction across the
audio spectrum
- Balanced,
transformerless output for increased immunity to noise over long cable
runs
- Shock mount
that provides over 20 dB isolation from surface vibration noise
- Locking
flange mount for permanently securing microphone to lecterns, pulpits, or
conference tables
Shure MX412/C Cardioid Microflex Gooseneck Microphone
Specifications:
- Frequency
Response: 50 Hz to 17 kHz
- Polar
Pattern: Cardioid
- Output
Impedance (at 1000 Hz): Rated at 150 ? (180 ? actual)
- Open Circuit
Sensitivity (at 1 kHz, ref. 1V/Pa): -33.5 dB (21.1 mV)
- Maximum SPL
(1 kHz at 1% THD, 1 kOhm load): 122.7 dB
- Equivalent
Output Noise (A-weighted): 26.5 dB SPL
- Signal to
Noise Ratio (referenced at 94 dB SPL): 67.5 dB
- Dynamic
Range at 1 kOhm Load: 96.2 dB
- Common Mode
Rejection: 45.0 dB minimum
- Mute Switch
Attenuation (switched models only): 50.0 dB minimum
- Preamplifier
Output Clipping Level (1% THD): –6.0 dBV (0.5 V)
- Polarity:
Positive sound pressure on diaphragm produces positive voltage on pin 2
relative to pin 3 of output connector.
- Power
Requirements: 11 to 52 Vdc phantom, 2.0 mA
- Environmental
Requirements
- Operating
Temperature Range: –18° C to 57° C (0° F to 135° F)
- Relative
Humidity: 0 to 95%
- Dimensions
- Microphone
- Gooseneck:
12" (30 cm)
- Head
Diameter: 0.46" (11.68 mm)
- Base
Length: 3.86" (98.04 mm)
- Base
Diameter: 0.79" (20.07 mm)
- Mounting
Flange
- Diameter:
2.62" (66.70 mm)
- Depth:
0.56" (14.40 mm)