The OSP ATA mixer/amp case is a very well solid designed case. The 12 space slanted top-mounted rack rails can fit a 19" wide rack mountable mixer and the bottom section has 16 space that can fit any standard 19" wide rack mountable gear. The front lid has fold-out legs that turns the lid into a table and can be attached to either side of the case. Once set up, the table stands 24-3/8" to the underneath and 28" to the table top. OSP cases are built with 3/8" high grade plywood with black laminate, ball corners, recessed spring-loaded handles, industrial butterfly latches and aluminum edges. OSP cases are Pro and built to last.

Includes a FREE small bag of rack screws and washers.

Features

• 3/8" plywood w/black laminate
• Tongue & groove metal railing
• Ball corners
• Industrial rivets
• Industrial latches
• Industrial spring-loaded handles
• Heavy-duty pre-tapped rack rails
• Front, rear, and top rack rails
• Mixer top slanted rack rails are 21" (12 space)
• Bottom front and back rack rails are 28" inches tall (16 Spaces)
• Bottom front and back rack rails (recessed 1" from ea edge)
• Removable top, front, and back Lids
• Front & back lids provide 2" of space inside, Top lid 5"
• 4" Casters wheels (2 Locking)
• Lid cover with fold-out legs to make table
• Table can attach to either side of case
• Free small bag of rack screws and washers

Outside Dimensions with Wheels On

Lids OFF: 21.5" W x 41" H x 25" D

Lids ON: 21.5" W x 44" H x 31" D

Lid Table Dimensions when setup: 38" W x 28" H x 21.5" D

Weight - 117 lbs