For performers who wish to unplug from the wire, BLX Wireless Systems are the clearest choice. Shure delivers wireless confidence with legendary sound from industry-renown microphones, decades of wireless design proficiency and world-class construction. BLX Wireless Systems are ready to perform right out of the box.

Package Includes:

• BLX88 dual wireless receiver
• 2 - BLX2/PG58 handheld transmitters with integrated PG58 cardioid dynamic microphones
• 2 - microphone clips

Shure BLX2 Transmitter Features:

• Integrated microphone capsule design
• -10 dB gain attenuation
• Lightweight, rugged construction
• Color ID caps (available separately )
• Up to 14 hours of continuous use (2x AA batteries included)
• Up to 300 feet (100m) transmission radius (line of sight)
• Quick and easy frequency matching (GROUP and CHANNEL selection buttons)
• Two-color transmitter status indicator LED
  • Green: “Ready”
  • Rapidly Flashing Red: “Controls Locked”
  • Solid Red: “Battery Power Low” (less than 1 hour remaining)
  • Flashing Red/Power Down: “Batteries Dead” (replace batteries to repower transmitter)

Shure BLX88 Dual Wireless Receiver:

• One-touch QuickScan frequency selection quickly locates the best open frequency (in case of interference)
• Up to 12 compatible systems per frequency band (region-dependent)
• Two-color audio status indicator LED
  • Green: Normal audio levels
  • Red: Excessive audio levels (overload/clipping)
• XLR and 1/4" output connectors

Shure BLX288/PG58 Specifications:

• Operating Range: 300 ft (91 m) line of sight (actual range depends on RF signal absorption, reflection and interference)
• Available Frequencies: Between 524 – 865 MHz (available frequencies depend on applicable regulations in country where system used)
• Audio Range: 50 Hz – 15 kHz (dependent on microphone type)
• Transmitter RF Output Power: 10 mW, typical (varies by region)
• Audio Output Connector: XLR and 1/4" (6.3 mm) unbalanced
• Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
• Battery Life: Up to 14 hours
• Dynamic Range: 100 dB A-weighted
• System Distortion: 0.5% THD typical (ref. +/- 38 kHz deviation, 1 kHz tone)
• Operating Temperature Range: -18°C (0°F) – +50°C (122°F)
• Power Requirements:
  • BLX2: 2 AA alkaline or rechargeable batteries
  • BLX88: 12 – 18 V DC at 320 mA, supplied by external power supply