The Shure PGASTUDIOKIT4 Microphone Kit is a versatile package of professional quality microphones, assembled to provide excellent sound for the recording and performance of amplified and acoustic instruments. The microphones selected for the PGASTUDIOKIT4 provide a wide variety of flexible solutions for most recording opportunities.

Shure PGASTUDIOKIT4 Includes:

• One (1) PGA52 Cardioid Dynamic Kick Drum Microphone
• One (1) PGA57 Cardioid Dynamic Instrument Microphone
• Two (2) PGA181 Side-Address Cardioid Condenser Microphones
• One (1) A25D Break-resistant microphone clip
• Two (2) WA371 Break-resistant microphone clips
• Four (4) C15J 15 foot (4.6 m) XLR-XLR Cables
• One (1) 95G16526 Zippered Carrying Case

Shure PGASTUDIOKIT4 Specifications:

• PGA52 Kick Drum Microphone:
• Type Dynamic (moving coil)
• Frequency Response: 50 Hz - 12 kHz
• Polar Pattern: Cardioid
• Output Impedance: 150 Ohms
• Sensitivity at 1 kHz, open circuit voltage: -55 dBV/Pa (1.75 mV)(1 Pa=94 dB SPL)
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
• Weight: 16.01 oz (454 g)
• Connector: Three-pin professional audio (XLR), male
• Operating Temperature: -20 to 165 °F (-29 to 74 °C)
• Operating Humidity (Relative): 0 to 95%
• PGA57 Instrument Microphone:
• Type: Dynamic (moving coil)
• Frequency Response: 70 Hz - 15 kHz
• Polar Pattern: Cardioid
• Output Impedance: 150 Ohms
• Sensitivity at 1 kHz, open circuit voltage: -56.5 dBV/Pa (1.5 mV)(1 Pa=94 dB SPL)
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
• Weight: 9.88 oz (280 g)
• Connector: Three-pin professional audio (XLR), male
• Operating Temperature: -20 to 165 °F (-29 to 74 °C)
• Operating Humidity: 0 to 95%
• PGA181 Side-Address Microphone:
• Type: Electret condenser
• Frequency Response: 50 Hz - 20 kHz
• Polar Pattern: Cardioid
• Output Impedance: 120 Ohms
• Sensitivity at 1 kHz, open circuit voltage: -38 dBV/Pa (12.7 mV)(1 Pa=94 dB SPL)
• Maximum SPL, 1 kHz at 1% THD, 1 kOhm: 138dB SPL
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
• Weight: 13.5 oz (383 g)
• Connector: Three-pin professional audio (XLR), male
• Housing: Cast zinc
• Power Requirements: 48 VDC phantom power (4 mA)