Shure PGXD14 Digital Wireless Bodypack System For Instruments - Guitar - Bass

PGX Digital adds the clarity of 24-bit digital audio to the famed PGX line of Shure wireless products. Offering tailored wireless solutions for vocalists, guitarists, and presenters, PGX Digital combines the trusted legacy of Shure microphones with state of the art, 24-bit digital wireless technology that delivers strong, clean RF performance. The result is wireless audio that sounds like wired, rock-solid RF signal, and simple setup and operation.

The PGX Digital Guitar Wireless System from Shure adds the clarity of 24-bit digital audio to the legacy of trusted Shure microphone options for wireless performance. This system includes the PGXD1 bodypack transmitter, which easily clips onto a belt or guitar strap, and the WA302 instrument cable to plug into guitar, bass, or any other ¼” line-level instrument output. Included: PGXD4 wireless receiver, PGXD1 bodypack transmitter, WA302 instrument cable, padded carrying case.

PGXD1 Bodypack Features

• Rugged, compact bodypack with belt clip and instrument cable
• 20 Hz – 20 kHz frequency range captures every nuance of your tone
• Power, mute, and battery status LED
• Up to 10 hours of continuous use from 2 AA batteries
• 200 ft (60 m) operating range
• 26 dB of continuously adjustable gain to match variable input levels

PGXD4 Wireless Receiver Features

• 24-bit / 48 kHz digital technology for incredibly accurate sound
• Automatic frequency selection locates a clear channel instantly
• One-touch sync automatically syncs the transmitter and receiver
• Rugged construction for reliable performance show after show
• True digital diversity for rock-solid wireless signal reliability
• Up to 10 compatible channels per frequency band
• ¼” and XLR audio output
• Included padded carrying case for portability and protection

PGXD4 Specifications

• Dimensions: 40 mm H X 181 mm W X 104 mm D (1.6 x 7.125 x 4.1 in.)
• Weight: 289 g (10.2 oz.)
• Housing: ABS
• Audio Output Level: (ref. ± 38 kHz deviation, 1 kHz tone): XLR connector (into 3000 O load): -2.5 dBV / 1/4 inch connector (into 10000 O load): +10 dBV
• Impedance: XLR: 50 O / 1/4 inch: 50 O
• Sensitivity: -102 dBm @ 10-5 BER
• Image Rejection: > 70 dB, typical
• XLR output: Impedance balanced; Pin 1: Ground (cable shield), Pin 2: Audio, Pin 3: No Audio
• Audio LED: Red: 2 dB below clip, Amber: 12 dB below clip, Green: 50 dB below clip
• Power Requirements:12-18 Vdc at 150 mA, supplied by external power supply
• Pin Assignments:XLR: 1=ground, 2=hot, 3=cold6.35 mm (1/4”) TRS: Tip=audio, Ring=no audio,Sleeve=ground

PGXD1 Specifications

• Audio Input Level: +10 dBV maximum, at minimum gain setting, -16 dBV maximum, at maximum gain setting
• Gain Adjustment Range: 26 dB
• Input Impedance: 1 M ohms
• RF Output Level: 10 mW maximum (dependent on applicable countryregulations)
• Dimensions: 108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
• Weight: 128 grams (4.5 oz.) without batteries
• Housing: Molded polycarbonate case
• Power Requirements: 2 “AA” size
• Battery Life: Up to 10 hours

System Specifications

• Operating Range: 60 m (200 ft.) under typical conditions. Note: actual range depends on RF signal absorption, reflection and interference.
• RF Carrier Range: X8: 902–928 MHz, X8A: 915–928 MHz, X8B: 902–907.5 MHz, 915–928 MHz (Note: varies by region)
  Audio Frequency Response (± 2dB): 20-20000 MHz
• System Gain: PGXD2: 0 dB at minimum gain setting, 6.35 mm (1/4“) connector / -12.5 dB at minimum gain setting, XLR output
  PGXD1: -54.5 dBV/Pa at -10 dB gain setting, with SM58 catridge, XLR output
• Total Harmonic Distortion: <0.02%, A-weighted, typical (Ref. 1 kHz, 6 dB below input clip)
• Dynamic Range: >108 dB A-weighted
• Operating Temperature Range: -18°C (0°F) to +50°C (+122°F). Note: battery characteristics may limit this range.